AH-200 High-Speed Automated Programming System

Product Overview
AH-200 is the most economic & effective automated programming system, which offers a special design for the tiny package of Tube/Tape device. It’s a unique design and technology for the rotary robot to pick the devices. Acceding to a high-speed programmer can bring AH-200 into full play to enhance the programming production.

Specification

• Throughput: 1300UPH
• Programming site: 4sets x 2sets=8sites
• Devices supported: EPROM, EEPROM, FLASH, MCU
• Applicable packages: SOP, SSOP, SON, PLCC-20, PLCC-28, PLCC-32, PLCC-44
• Tube-in: 150mil, 208mil, 300mil, PLCC20, PLCC28, PLCC32, PLCC44
• Package available: 30 tubes auto each package
• Tube-out: 150mil, 208mil, 300mil, PLCC20, PLCC28, PLCC32, PLCC44
• Package available: 30 tubes auto each package
• Tape-in: Available for tape with 12~ 34mm tape width
• Tape-out: Press-sealing mode. Accept tape with 12~ 24 mm

Automated Device Testing/ Programming System AH-600

Product Overview

Are you still piling the stock?

• But the programmable and new-type Oscillator with high efficiency already appear in the industry, it simplifies the production flow, shorten the lead time for the customized products, and does not need to afford much pressure for the cost of pilling in the storehouse.
• AH-600 is the first automated system for SMD parameter testing and frequency programming in the market. It’s a unique design and technology for the rotary robot to pick the devices, in conjunction with the high-speed programmer can bring AH-600 into full play for enhancing the throughput.

Specification

• Throughput: 2400UPH
• Pick and Place method ︰ 4 vacuum nozzles
• Component detection ︰ Photoelectric Sensor
• Dimensions ︰ 726×622×1180 （ W/D/H ） mm
• Add loading and unloading system Dimensions
• Net weight ︰ 180kg
• Component Holder System
• Holder Dimensions ︰ Φ 61mm
• 5 Operating position ︰ Pick 、 Place 、 Detection 、 Programming 、 Verification
• Operating Requirements
• Input voltage ︰ AC200~245V ， single-phase ， 3-wires
• Input line frequency ︰ 50/60Hz
• Power consumption ︰ 1.5KVA
• Air pressure ︰ 0.6MPa (5.5~ 6.0kg /cm2)
• Air flow ︰ 32liter/min

Mini Programmable DC Power Supply Series

mPP series (Mini Programmable DC Power Supply) is the most compact linear power supply in the world. The mPP series provide high performance and reliability. Moreover, it offers high stability for applications that need precise output control and low noise.

mPP-3035T

Specification

• High resolution:
• Voltage:1mV
• Current:1mA
• Maximum Power:225W
• Output DC Power verification range:
• V:0.05V-30V(Range:up to 30.999V)
• I:0.01A~3.5A(Range:up to 3.6A)
• Provide the constant power output:
• Voltage could switch:1.5V/1.8V/2.5V/3.0V/3.3V/5V
• Output current:~3A

mPP-3040D

Specification

• High resolution:
• Voltage:1mV
• Current:1mA
• Maximum Power:135W
• Output DC Power verification range:
• V:0.05V-30V(Range:up to 30.999V)
• I:0.01A~4.0A
• Provide the constant power output:
• Voltage could switch:1.5V/1.8V/2.5V/3.0V/3.3V/5V
• Output current:~3A

Logic Analyzer & Data Logger

The LA Series help minimize your project risk by providing the most reliable, accurate data capture and the most complete view of system behavior. These products are ideally suited for you on hardware/software debug, parametric and mixed signal testing and complex debugging. Moreover, their compact size and ability to connect to a PC makes them an ideal solution for use at remote sites.

LA-2025

Specification

• Timing Analysis : 250MHz,max (4ns)
• State Analysis : 200MHz(Max)
• Bandwidth : 200M Hz
• RAM Size : 2M Bytes
• Storage Depth Per Channel : 512Kbit x 32CH
• Glitch Capture : Yes
• PC-Link Interface : USB 2.0

LA-2050

Specification

• Timing Analysis : 500MHz,max (2ns)
• State Analysis : 200MHz(Max)
• Bandwidth : 200MHz
• RAM Size : 4M Bytes
• Storage Depth Per Channel : 1Mbit x 32CH
• Glitch Capture : Yes
• PC-Link Interface : USB 2.0

For more products models and specifications pleas go to Leaptronix Website.